Abstract
Presence of heavy metals in the aquatic systems has become a serious problem. As a result, there has been a great deal of attention given to new technologies for removal of heavy metal ions from contaminated waters. Biosorption is one such emerging technology which utilized naturally occurring waste materials to sequester heavy metals from industrial wastewater. The aim of the present study was to utilize the locally available agricultural waste materials for heavy metal removal from industrial wastewater. The wastewater containing lead and hexavalent chromium was treated with biomass prepared from ficus religiosa leaves. It was fund that a time of one hr was sufficient for sorption to attain equilibrium. The equilibrium sorption capacity after one hr was 16.95 ± 0.75 mg g-1 and 5.66 ± 0.43 mg g-1 for lead and chromium respectively. The optimum pH was 4 for lead and 1 for chromium. Temperature has strong influence on biosorption process. The removal of lead decreased with increase in temperature. On the other hand chromium removal increased with increase in temperature up to 40ºC and then started decreasing. Ion exchange was the major removal mechanism along with physical sorption and precipitation. The biosorption data was well fitted to Langmuir adsorption model. The kinetics of biosorption process was well described by the pseudo 2nd order kinetics model. It was concluded that adsorbent prepared from ficus religiosa leaves can be utilized for the treatment of heavy metals in wastewater.
Upon acceptance of an article by the journal, authors will be asked to transfer the copyright to Electronic Journal of Biotechnology, which is committed to maintain the electronic access to the journal and to administer a policy of fair control and ensure the widest possible dissemination of the information. The author can use the article for academic purposes, stating clearly the following: "Published in Electronic Journal of Biotechnology at DOI:10.2225/volXX-issueX-fulltext-XX".
The Copyright Transfer Agreement must be submitted as a signed scanned copy to biotec@ucv.cl. All authors must send a copy of this document.